| |
 |
Standard Configuration ○Main body/TX-831(incorporated
MAXEED/TS-621) ○TI-632 ○TF-621 ○TP-643 |
*IRON of a photograph is TI-652.
|
|
| [ Description ] |
| CAD data (LZH file) |
 |
|
| Model No. |
MINICROSS(TX-831) |
| Power requirements |
AC100V ±10% 50/60Hz 1.0KVA |
| Ambient temp. Humidity, Environment |
0~40с(Non-condensing, no corrosive gas and no significant dust) |
| Air requirement |
0.4~0.5MPa(4~5kgf/c㎡) Dry air |
| Movement method, No. of control axis |
PTP, Total 4-axis control ( 3-axis simultaneous linear and circular
interpolation) |
| Drive method |
AC servomotor, Ball screw drive |
| Performance of each axis |
| |
Stroke |
Positioning repeatability |
Max. speed |
| X-axis |
230mm |
±0.02mm |
500mm/s |
| Y-axis |
250mm |
±0.02mm |
400mm/s |
| Z-axis |
80mm |
±0.02mm |
200mm/s |
| R-axis |
360° |
±0.2° |
500°/s |
|
| Program capacity |
48 Programs |
| Data capacity |
Total program steps 6000steps, Total teaching points 3000positions |
| Teaching method |
By Teaching pendant,TTP-820(Optional parts)
Direct teaching by jogging or MDI using Teaching Pendant. |
| Input |
| Private |
Start, Stop, Emergency stop, Area-sensor, Door SW |
| General |
10points |
|
| Output |
| Private |
Under operation, Solder error, Signal tower(Red, Yellow, Green),Buzzer |
| General |
10points |
|
| No. of Soldering conditionst |
9999conditions. Free Program Method |
| Soldering motion |
Point soldering or Slide soldering |
| Weight |
48kg |
(*)Teaching pendant/TTP-822 is Optional parts. |
 |
|
|
|